 |
BII-275SA
The BII-275SA series is a very robust cold saw that relies on a heavy cast frame coupled with a heavy duty gearbox and motor for years of production. The BII-275SA is simply the best investment when you don't require more than an 11" blade.
The Model BII-275SA comes standard with the movable safety guard and complete liquid cooling system, ensuring safety and long blade life. This machine can miter a total of 150 degrees - 90 to the left and 60 to the right.
This cold saw has an semi-automatic feed (power assisted feed) meant for those thicker cuts through pipe, stainless steel tubing, or solid bar.
These are the perfect cold saws for thin, medium, or thick walled pipe, tubing, or solid bar stock.
Each machine comes equipped to run two speeds for mild steel or stainless steel.
Baileigh Industrial Saws provide more quality for your investment.
|
Cutting Capacity - Model: BII-275SA |
||
|
Head Swivel |
90° |
45° |
|
|
75mm (2.953") |
60mm (2.362") |
|
|
75mm x 75mm (2.953" x 2.953") |
55mm x 55mm (2.165" x 2.165") |
|
|
75mm x 75mm (2.953" x 2.953") |
55mm x 55mm (2.165" x 2.165") |
|
|
75mm x 75mm (2.953" x 2.953") |
55mm x 55mm (2.165" x 2.165") |
|
|
70mm x 75mm (2.756" x 2.953") |
60mm x 55mm (2.362" x 2.165") |
|
MODEL |
BII-275SA |
|
Maximum Blade Diameter (inches) |
11 |
|
Blade RMP - Mild Steel/Stainless Steel |
60/30 |
|
Head Swivel (left/center/right) |
90°/0°/50° |
|
Saw Blade Size That Ships W/Machine |
10 |
|
Cold Saw Type |
Semi Auto |
|
Dual acting, Self Centering, Dual Clamping Vise - Manual / Air |
Double / Air |
|
Pneumatic Consumption |
N/A |
|
Machine Dimensions |
36x30x59 |
|
Electrical Service Requirements |
220V/3PH/60H |
| Weight Net/Gross | 528 lbs/600 lbs |
Our line of miter cold saws consists of a manual cold saw line (with or without pneumatic clamping on the vise), as well as semi-automatic mitering cold saws. Each machine offers a two speed adjustment for most different materials like mild steel, chromolly, and stainless steel. A cold saw uses a circular saw blade that runs in a bath of coolant increasing blade life, decreasing dusts and grit, with no sparks. The real advantage of our cold saws compared to any band saw on the market is if the fabricator needs to use the machine as a miter saw. A cold saw can miter a true 45 degree angle with no burr and will be exact. Using bands saws might have a slight taper and will definitely have a burr to clean up before welding the miters together. Our cold saws are made of a very heavy casting and with our pivot point we eliminate chatter. The heavier the cold saw the better, coupled with an industrial grade gear box will improve blade life. Our cold saws should be specified if cutting round tube, pipe, or solids; square or rectangular tubing or solids; and should be used in place of chop saws, band saws, abrasive saws, or circular saws. Hennessey Moto Fab cold saws have mitering capabilities of 150 degrees (90 degrees in one direction and 60 degrees in the other). All Hennessey Moto Fab cold saws have double clamping vises, so both sides of the cut are clamped, for truer cuts and less likelihood of damage to the cold saw blades. Please enter this page and see why a Hennessey Moto Fab cold miter saw is simply the best sawing machine on the market for the investment.
|
-
Home -
Band Saws -
Benders -
Brakes -
Cold Saws - Iron Workers -
Hennessey Moto Fab Hennessey Motofab prides itself with having quality machine tools like a full line of benders like pipe benders, tube benders, hydraulic tubing benders, mandrel tubing benders, and exhaust pipe benders. We carry the Huth exhaust bender line, and RMD bender line. RMD tubing benders are the number one choice of pipe benders in North America. The RMD tube bender line is proudly Made in America. The Huth exhaust pipe bender line is also proudly Made in America. When it comes to tubing benders you can't go wrong with the quality of RMD for fabrication and Huth for exhaust. The SIMASV horizontal press brake line allows the general fabricator the ability to press bend flat stock, punch, shear, rotary draw bend, and ram bend. These small horizontal press brakes are more versatile than the big vertical press brakes. If your looking for a general metal bender for your shop floor, look no further. Our ironworker line is Edwards ironworkers that is Made in America. An Edwards hydraulic ironworker ranges from 25 tons to 125 tons in power making this line a versatile iron worker choice. Find out why an Edward's hydraulic iron worker is one of the most popular choices on the market. Our line of Huth tubing swager, pipe reducers, expanding, and tube end forming machines is one of the most popular machines on the market. Our tube swaging machines offer a very affordable end former option. If you need to expand, reduce, or flare tubing or pipe, then you need to look at this line closely. Our line of Simasv sheet metal equipment consists of the best sheet metal notchers on the market. Our sheet metal notcher line consists of a dozen models that range from fixed angle notchers (90 degree) to variable angle notchers capable of corner notching mild steel or stainless steel sheet metal at angles up to 180 degrees. No other notcher line offers this type of high quality construction at such reasonable prices. Enter this site to see why Simasv sheet metal machinery is one of the world leaders in sheet metal forming. Our line of RMD tube notchers consist of patented eccentric cut end mill notching technology, as well as an abrasive notcher. A RMD abrasive tube notcher is great for thin wall tubing notcher requirements and comes with a sanding station for cleaning up an burrs. No other abrasive tube notcher is made with the quality that RMD puts into every machine they make. When heavy wall applications are common the Eccentric Cut tube notcher is the industries machine of choice since it can notch tubing and thick wall pipe with ease. The patented feature allows the operator to notch all the way up to 3 inches with one end mill. Come see why the Eccentric Cut is the preferred pipe notching machine on the market. Our line of National sheet metal shears range in size and power and includes manual shear, air shear, pneumatic shear, and hydraulic shear options, fitting almost all requirements out there. Our metal shear has a unique design that lengthens shear blade life allowing for years of operation. We also carry National sheet metal brakes that act as a quality sheet metal bender and box and pan brake. When looking for a quality sheet metal brake look no further than National sheet metal brakes, they make sheet metal bending a breeze. National machines are Made in America. The line of Baileigh band saw and cold saw machines offer sensible solutions for sawing solid metal, or tube and pipe. Our cold saws range in sizes from 11 inch to 18" cold saw blades. The circular cold saws have the ability to miter saw at up to 45 degrees in either direction and come in manual, semi-automatic, or fully automatic versions. A coldsaw is the perfect choice for sawing tube or pipe. When there is a saw requirement for solid bar stock a metal band saw or horizontal band saw is the perfect cut off saw for the job. Good saws are rigid enough to miter saw at different angles and should have little or no vibration allowing for long band saw blade life. Due to the ridged construction of our saw line, our saw blade life is longer than other models on the market. We welcome you to our website and invite you to call with any questions regarding our quality line of machine tools.. A Hennessey MotoFab sales technician awaits your call.
Copyright ©
2005
Hennessey Moto Fab |