Click to go to Hennessey MotoFab.com Homepage, Where we sell everything from Cold Saws to Benders and Everything In Between.
 

Home

Band Saws

Benders

Brakes

Cold Saws

Iron Workers

Notchers

Shears

Contact Us

Links
 
 
 
Band Saw - 350MHDSV
Band Saws - BS-330MSTV Band Saw

 
General Specifications:
Blade Size is 1"x.035"x10'-6"
Variable Blade Speed is 114' to 262'/min
Motor is 2HP
Mesurements are 74"x30"x44"
Weight is 800 lbs.
Broken Blade tension device shuts down machine if blade breaks.
Two cutting functions (manual or controlled descent)
220 Volt, 60Hz, Single Phase
Price: $4650.00

 
Capacity:
Cutting Degree 90° 45° 60° 45° (L)
Round 10½" 9½" 6-5/16" 8¼"
Square 10" 8¾" 6" 7"
Rectangle 13¾" x 8½" 9½" x 6-5/16" 6" x 6" 7" x 7"
  • Cast iron saw head provides rigidity and swivels in two directions, 0-60 degrees (R) and 0-45 degrees (L)
  • Direct gear drive helps extend saw blade life, and allows saw head to make more accurate cuts and cut faster.
  • Dual descent modes: 1 -Manual descent mode is operated by pulling down on handle and actuating trigger switch. 2- Hydraulic descent feed can be adjusted by operator.
  • Powerful coolant pump cools blade and assists chip removal system
  • Broken blade tension devise shuts down machine if blade breaks.

The gear driven BS-350MHDSV is a 10-1/2"" Band Saw and is the perfect saw for cutting at 90 degrees or miter angles. This saw has a dual angle head capable of cutting 0-60 degrees (R) and 0-45 (L), making it one of the most versatile saws on the market. Quick releases allow the operator to change the miter angle in seconds. Each gear driven metal cutting bandsaw we offer has variable speed, miter heads, and a hydraulic controlled descent devise for perfect feeds and longer blade life. Our band saws are constructed of a heavy cast iron saw head and base and the blades are guided via a tungsten carbide insert offering rigidity and accuracy. Each band saw has a powerful coolant system and a broken blade tensioning devise that shuts down the machine if the blade breaks.

The MHDSV series bandsaw offers two cutting functions: 1- Manual descent for small production runs. The operator simply turns on the machine via a trigger switch in the descent handle, and manually guides the bandsaw blade through the material. Perfect for the small fabricators needs. 2- Hydraulic descent for larger production runs increases blade life and reduces operator fatigue. The hydraulic descent has a down feed adjustment for feed pressure. The saw head is manually lifted to reset the hydraulic descent for the next cut. This metal bandsaw can cut up to 8-1/2"x13-3/4" rectangle. These models have service requirements of 220V, Single Phase, 60 Hertz. The MHDSV horizontal bandsaw has a dual swiveling miter head, allowing the operator to miter 60 degrees in one direction and 45 degrees in the other direction. This series of horizontal band saw comes standard with a variable speed drive allowing the operator to fine tune the blade speed from 114' to 262' / min. The MHDSV metal cutting saw series requires a 1" wide saw blade by .035" wall thickness, making this series a very precise miter saw. Baileigh Industrial provides quality bandsaws at an exceptional value.

 

- Home - Band Saws - Benders -  Brakes - Cold Saws - Iron Workers -
- Notchers - Shears - Contact Us -

Hennessey Moto Fab
Phone: (920) 652-9884 (920) 652-9885
Hours: 8:00 - 5:00CST Monday - Friday
Sales@HenneyMo.com

Hennessey Motofab prides itself with having quality machine tools like a full line of benders like pipe benders, tube benders, hydraulic tubing benders, mandrel tubing benders, and exhaust pipe benders.  We carry the Huth exhaust bender line, and RMD bender line.  RMD tubing benders are the number one choice of pipe benders in North America.  The RMD tube bender line is proudly Made in America.  The Huth exhaust pipe bender line is also proudly Made in America.  When it comes to tubing benders you can't go wrong with the quality of RMD for fabrication and Huth for exhaust.

The SIMASV horizontal press brake line allows the general fabricator the ability to press bend flat stock, punch, shear, rotary draw bend, and ram bend.  These small horizontal press brakes are more versatile than the big vertical press brakes.  If your looking for a general metal bender for your shop floor, look no further.

Our ironworker line is Edwards ironworkers that is Made in America.  An Edwards hydraulic ironworker ranges from 25 tons to 125 tons in power making this line a versatile iron worker choice.  Find out why an Edward's hydraulic iron worker is one of the most popular choices on the market. 

Our line of Huth tubing swager, pipe reducers, expanding, and tube end forming machines is one of the most popular machines on the market.  Our tube swaging machines offer a very affordable end former option.  If you need to expand, reduce, or flare tubing or pipe, then you need to look at this line closely.

Our line of Simasv sheet metal equipment consists of the best sheet metal notchers on the market.  Our sheet metal notcher line consists of a dozen models that range from fixed angle notchers (90 degree)  to variable angle notchers capable of corner notching mild steel or stainless steel sheet metal at angles up to 180 degrees.  No other notcher line offers this type of high quality construction at such reasonable prices.  Enter this site to see why Simasv sheet metal machinery is one of the world leaders in sheet metal forming.

Our line of RMD tube notchers consist of patented eccentric cut end mill notching technology, as well as an abrasive notcher.  A RMD abrasive tube notcher is great for thin wall tubing notcher requirements and comes with a sanding station for cleaning up an burrs.  No other abrasive tube notcher is made with the quality that RMD puts into every machine they make.  When heavy wall applications are common the Eccentric Cut tube notcher is the industries machine of choice since it can notch tubing and thick wall pipe with ease.  The patented feature allows the operator to notch all the way up to 3 inches with one end mill.  Come see why the Eccentric Cut is the preferred pipe notching machine on the market.

Our line of National sheet metal shears range in size and power and includes manual shear, air shear, pneumatic shear, and hydraulic shear options, fitting almost all requirements out there.  Our metal shear has a unique design that lengthens shear blade life allowing for years of operation.  We also carry National sheet metal brakes that act as a quality sheet metal bender and box and pan brake.  When looking for a quality sheet metal brake look no further than National sheet metal brakes, they make sheet metal bending a breeze.  National machines are Made in America.

The line of Baileigh band saw and cold saw machines offer sensible solutions for sawing solid metal, or tube and pipe.  Our cold saws range in sizes from 11 inch to 18" cold saw blades.  The circular cold saws have the ability to miter saw at up to 45 degrees in either direction and come in manual, semi-automatic, or fully automatic versions.  A coldsaw is the perfect choice for sawing tube or pipe.  When there is a saw requirement for solid bar stock a metal band saw or horizontal band saw is the perfect cut off saw for the job.  Good saws are rigid enough to miter saw at different angles and should have little or no vibration allowing for long band saw blade life.  Due to the ridged construction of our saw line, our saw blade life is longer than other models on the market.

We welcome you to our website and invite you to call with any questions regarding our quality line of machine tools..  A Hennessey MotoFab sales technician awaits your call.

Copyright © 2005 Hennessey Moto Fab
~ Terms of Use ~ Privacy Policy ~ Terms of Sales ~